Before operating Visionpro
®
series display cubes, please read and observe the
following safety precautions thoroughly.
Ensure proper grounding(grounded as indicated in
the figure)
The product should be grounded properly. Otherwise, a
series of problems will occur: serious system fault,
system instability and unreliability, and even the
paralysis to the whole system. Even worse, the safety of
users cannot be ensured.
Do not change the original design
Any addition to or deletion from any mechanical part
or electrical circuit in this product is prohibited.
VTRON will not assume any liability resulting
therefrom.
Do not install unauthorized software
The Visionpro
®
series display cube is a dedicated
device and must not be used for any other purpose.
Consult VTRON or a designated agent for the
installation of your own software. VTRON will not
assume any liability resulting therefrom.
To Next Page
Loading...