7 Daily Maintenance
1. Please use dedicated cleaning tools to clean the screen surface of the display cube;
2. Do not touch the screen surface with your hands;
3. Please use dedicated cleaning tools to clean lens;
4. Do not replace the LED light source for yourself;
5. Please keep a clean, dust-free, and well- ventilated environment for the display
system.
6. Please regularly check the connection of all cables.
7. Please turn on and run the system for 1 to 2 hours each week, if the system is not
frequently used. In damp seasons, once or more per day is recommended.
Light Source
Note:
During projector operation, avoid looking directly at the lens.
It is normal for the brightness of the light source to be reduced when it is close to the end
of its lifetime.
Fan
Do not place any objects in or on the ventilation hole in the projector to ensure proper
ventilation and heat dissipation.
Grounding
Please ensure that the grounding wires of both the display system and the power
supply are at the same level and that they are connected to the ground in order to prevent
lightning and static damage.
Operating Environment
Please keep a clean, dust-free and well-ventilated environment for the display system.
Cable Connections
Please use cables provided by VTRON and regularly check the connection of all
cables.
To Next Page
Loading...