Dust in the air and hot air may cause the hardware of the
Visionpro
®
series display cube to short-circuit. Do not
operate the cube in a dusty or high-temperature
environment.
A10 cm clearance must be maintained at the top of
the vertical top layer of the Visionpro
®
series display
cube for the air circulation of the fan.
Some screens are sensitive, and fingerprints on the screen
will affect their optical performance. So the Visionpro
®
series display cube must be protected against any
touching or scratching.
Disconnecting device of grid power
This equipment uses a coupler or power connector as the
disconnecting device. Make sure that the connector or
coupler is easily accessible so that you can disconnect the
grid power in an emergency.
To Next Page
Loading...