Vulcan-Hart E36LC SERIES - User Manual

A product of VULCAN-HART Louisville, KY 40201-0696
Form 25297 (July 2008)
E36SLC MODEL SHOWN
- NOTICE -
This Manual is prepared for the use of trained Vulcan Service
Technicians and should not be used by those not properly qualified.
If you have attended a Vulcan Service School for this product, you
may be qualified to perform all the procedures described in this
manual.
This manual is not intended to be all encompassing. If you have not
attended a Vulcan Service School for this product, you should read,
in its entirety, the repair procedure you wish to perform to
determine if you have the necessary tools, instruments and skills
required to perform the procedure. Procedures for which you do not
have the necessary tools, instruments and skills should be
performed by a trained Vulcan Service Technician.
Reproduction or other use of this Manual, without the express
written consent of Vulcan, is prohibited.
SERVICE MANUAL
ELECTRIC RESTAURANT
RANGES
E36LC SERIES
ML-136624
For additional information on Vulcan-Hart Company or to locate an authorized parts
and service provider in your area, visit our website at www.vulcanhart.com.

Summary

General Information and Specifications

Introduction to Vulcan Ranges

Manual for Vulcan Restaurant Series Electric Range with convection oven.

Service Tools Required

Lists standard and special tools required for service procedures.

Model Specifications

Provides electrical specifications, voltages, and amps for various models.

Part Removal and Replacement

Accessing Internal Components

Instructions for removing control panel, kick panel, and range top.

Blower System Components

Procedure for removing and replacing the blower wheel and motor.

Oven Door and Mechanism

Instructions for removing the oven door and its associated components.

Heating Elements and Thermostats

Procedure for removing oven heating element, French plates, hot top, and thermostats.

Switches and Indicators

Steps to remove and replace infinite switches, rocker switches, and indicator lights.

Motor Contactor (480 V)

Steps to remove and replace the motor contactor for 480V units.

Service Procedures and Adjustments

Oven Thermostat Calibration

Steps to calibrate the oven thermostat for accurate temperature control.

Griddle and Hot Top Thermostat Calibration

Procedure to calibrate griddle and hot top thermostats based on size.

Switch and Door Adjustments

Testing 3-heat and infinite switches, and adjusting the oven door.

Heating Element Performance Test

Procedures for testing heating elements using voltage, amps, or ohms.

Electrical System Operation

Component Functionality

Explains the function of key electrical components like thermostats, switches, and elements.

Oven Operating Sequence

Describes the operational sequence for 208/240V and 480V oven models.

Wiring Diagrams

208;240 V Main Wiring Diagram

Electrical wiring diagram for 208V and 240V E36LC models.

208;240 V Detailed Wiring Diagram

Detailed wiring diagram components and references for 208/240V models.

480 V Main Wiring Diagram

Electrical wiring diagram for 480V E36LC models.

480 V Detailed Wiring Diagram

Detailed wiring diagram components and references for 480V models.

208;240 V Top Configuration Wiring

Wiring diagram for the top configuration of 208/240V models.

480 V Top Configuration Wiring

Wiring diagram for the top configuration of 480V models.

Troubleshooting Common Issues

Oven Troubleshooting

Lists symptoms and possible causes for oven heating and temperature problems.

Range Top Troubleshooting

Lists symptoms and causes for range top heating and temperature problems.

Vulcan-Hart E36LC SERIES Specifications

General

Brand	Vulcan-Hart
Model	E36LC SERIES
Category	Ranges
Language	English