12
GO TO STEP 8 FOR LARGE, AND STEP 11 FOR EXTRA LARGE
Attach the four Upper Frame Tubes
to the ends of the Climbing Rails,
via the T-Joiners.
Note: Start by assembling your
product upside down. This will
make it easier to assemble.
Note: If you are
attaching a Cargo Net,
you will not use this top
Step Tube.
A. Insert Step Tubes between
two pairs of Lower Frame
Tubes, into the bottom holes
on the sides.
B. Repeat for the top holes on the sides, but use
a Step Tube for one and a Step for the other.
B
A
5
STEP
ALL SIZES:
6
STEP
ALL SIZES:
To Next Page
Loading...
