Run First Time Installation
If you choose Simple configuration mode, the following picture will appear.
The five modes are available for the satellite cable connection between LNB and your Vu+ as below :
• Single
This option is used to receive a single satellite with a single LNB. The cable from LNB is directly
connected to Vu+.
For the other modes, please refer to the user manual of SOLO2.
Use the left and right buttons to change an option.
Please set up tuner A.
Mode
Satellite
Send DiSEqC
Configuration Mode
Single
Astra(19.2E)
no
Simple
9
To Next Page
Loading...
