VWR International MU 6100 H User Manual

Commissioning MU 6100 H
16 ba77077e02 09/2014
4.3.1 Inserting the batteries
1Screws
2 Battery compartment
CAUTION
Make sure that the poles of the batteries are positioned cor-
rectly.
The ± signs on the batteries must correspond to the
± signs in
the battery compartment.
You can operate the meter either with normal batteries or with
rechargeable batteries (Ni-MH). In order to charge the batteries, an
external charging device is required.
1. Place four batteries (type Mignon AA) in the battery compartment.
2. Close the battery compartment.
3. Set the date and time
(see section 5.4.6 E
XAMPLE 2 ON NAVIGATION: SETTING THE DATE AND TIME,
page 24).
1
2

VWR International MU 6100 H Specifications

General

Brand	VWR International
Model	MU 6100 H
Category	Multimeter
Language	English