VWR International MU 6100 H User Manual

MU 6100 H Data memory
ba77077e02 09/2014 67
If the memory is full The following window appears if all 200 storage locations are occupied:
You have the following options:
 To erase the entire memory, confirm Yes.
 To cancel the storing process and switch to the measured value display,
confirm No. Then you can e.g. store the recorded data to a PC (see section
11.3.1 E
DITING THE MEASUREMENT DATA MEMORY, page 69) and subsequently
erase the data memory (see section 11.3.2 E
RASING THE MEASUREMENT DATA
MEMORY, page 71).
11.2 Automatic data storage at intervals
The storing interval (Interval) determines the time interval between automatic
data storing processes. With each data storage process, the current datasets
of the sensors indicated on the display are transmitted to the interface at the
same time.
Configuring the
automatic memory
function
Data storage full. Erase?
Yes
No
Warning
15.02.2014
14:15
Back
1. Press the <STR_> key.
The menu for automatic data storing appears.
1 Specified entire storing duration
2 Max. available storing duration
3 Graphical display of the memory usage
1
ID number
1
Interval
30 s
Duration
180 min
Continue
0d03h00min
0 1d17h33m
in
Automatic data storage
15.02.2014
14:15
2
3
Back

VWR International MU 6100 H Specifications

General

Brand	VWR International
Model	MU 6100 H
Category	Multimeter
Language	English