VWR International MU 6100 H User Manual

MU 6100 H Operation
ba77077e02 09/2014 17
5Operation
5.1 General operating principles
5.1.1 Keypad
In this operating manual, keys are indicated by brackets <..> .
The key symbol (e.g. <OK>) generally indicates a short keystroke (under
2 sec) in this operating manual. A long keystroke (approx. 2 sec) is indicated
by the underscore behind the key symbol (e.g. <OK
_>).
<F1>:
<F1
_>:
<F2>:
<F2
_>:
Softkeys providing situation dependent functions, e.g.:
<F2>/[USB output]:
Outputs data to the USB interface
<F2_>/[USB output]:
Configures the automatic data output to the USB inter-
face
<On/Off>: Switches the meter on or off
<MODE>: Selects the measured parameter / Quits the settings
<CAL>:
<CAL
_>:
Calls up the calibration procedure
Displays the calibration data
<STR>:
<STR
_>:
Saves a measured value manually
Opens the menu for the automatic save function
<RCL>:
<RCL
_>:
Displays the manually stored measured values
Displays the automatically stored measured values
<><>:
<_><_>:
Menu control, navigation
Increments, decrements values
Increments, decrements values continuously
<OK>:
<OK
_>:
Opens the menu for measurement settings / confirms
entries
Opens the menu for system settings
<HOLD> Freezes the measured value (HOLD function)

VWR International MU 6100 H Specifications

General

Brand	VWR International
Model	MU 6100 H
Category	Multimeter
Language	English