VWR avantor Micro Star 21 - 2� 3� Transporting

vwr.com I Instruction manual VWR Micro Star 21
32 / 87
Transport and Set Up
2. 3. Transporting
Before transporting a centrifuge make sure that
 the power supply cable is unplugged and removed from the centrifuge.
 the rotor is removed.
CAUTION Damage to centrifuge or drive shaft due to movement of an installed rotor. Always
remove the rotor before you transport the centrifuge.
 the centrifuge door is closed.
CAUTION Hands can be squeezed by an open centrifuge door. Always close the centrifuge
door before you transport the centrifuge.
Before transporting a rotor make sure that
 all components, like adapters and buckets are removed to prevent dropping
damage.
 the centrifuge is lifted at both sides and not at the front or back.
WARNING Always lift the centrifuge on both sides. Never lift the centrifuge by its front or
back.
Figure 2: Lifting the Centrifuge at Both Sides