vwr.com I Instruction manual VWR Micro Star 21
84 / 87
Chemical Compatibility
Chemical Compatibility
MATERIAL
CHEMICAL
Aluminium
Anodic Coating for Aluminum
Buna N
Cellulose Acetate Butyrate
Polyurethane Rotor Paint
Composite Carbon Fiber/Epoxy
Delrin™
EPDM rubber
Glass
Neoprene
Noryl™
Nylon
PET¹, Polyclear™,Clear Crimp™
Polyallomer
Polycarbonate
Polyester, Glass Thermoset
Polythermide
Polyethylene
Polypropylene
Polysulfone
Polyvynil Chloride
Rulon A™, Teflon™
Silicone Rubber
Stainless Steel
Titanium
Tygon™
Viton™
hydroGen peroxide
(10%)
U U M S S U U / S S S U S S S M U S S S S S S M S U S
hydroGen peroxide
(3%)
S M S S S / S / S S S S S S S S M S S S S S S S S S S
xylene S S U S S S M U S U U U U U U M U M U U U S U M S U S
zinc chloride U U S S S S U S S S S S S S S S S S S S S S S U S S S
zinc sulFate U S S / S S S S S S S S S S S S S S S S S S S S S S S
citric acid (10%) M S S M S S M S S S S S S S S S M S S S S S S S S S S
S Satisfactory
m Moderate attack, may be satisfactory for use in centrifuge depending on length of exposure, speed involved, etc.; suggest testing under actual
conditions of use
u Unsatisfactory, not recommended
/ Performance unknown; suggest testing, using sample to avoid loss of valuable material
1
Polyethlyeneterephtalate
NOTICE Chemical resistance data is included only as a guide to product use. Because no organized chemical compatibility data exists for materials under the stress of
centrifugation, when in doubt we recommend pretesting sample lots.
To Next Page
Loading...
