Unpacking
1 2
3
4
15 = 100 - 120V
30 = 220 - 240V
6
6
5
• DO NOT attempt to modify any part of this product.
• DO NOT allow the machine to be submerged in any liquid.
• DO NOT use in any setting other than an indoor laboratory.
• DO NOT plug power cord into an incorrect outlet or subject it to an incorrect voltage.
• Use this product only for its intended purpose.
• DO NOT use attachments not recommended by the manufacturer.
• DO NOT operate the product if it is damaged in any way.
• Keep this product away from heated surfaces.
• DO NOT modify the plug or cord that is provided. If the plug will not fit the outlet,
have the proper outlet installed by a qualified electrician.
• DO NOT operate the product with the safety ground disconnected.
WARNING: Reduce the risk of unintentional starting; make sure the speed switch is in
the OFF position before plugging in the motor.
WARNING: Damaged or worn power cords should be repaired or replaced immediately
by a qualified electrician.
WARNING: Improper connection of the equipment can result in a risk of electric shock.
Warning / Safety Information
Voltage
Remove Warning stickers from the back of the unit and check that the voltage
matches the voltage delivered by your electric power supply.
CAUTION: DO NOT connect the unit to the main power supply until correct voltage
is selected. Plug the unit into power supply using the supplied power cord.
CAUTION: If the voltage supplied to the unit is higher than what is indicated on the
voltage switch, the electronics can be irreversibly damaged, voiding the warranty.
220 V
To Next Page
Loading...
