6
Warnings
Before using, read this operation manual to ensure correct usage and thorough understanding of the
instrument. Incorrect handling could possibly result in personal injury or physical damage of the unit or its
accessories. The manufacturer accepts no responsibility for any damage caused by mishandling that is
beyond normal usage as defined in this manual. The manufacturer is only responsible for the security,
reliability and performance of the instrument, if the unit is operated in accordance with the operating
instructions. Any adjustments, changes or repairs must be performed by authorized personnel.
NOTES AND WARNINGS
Notes and warnings appear throughout this manual to provide additional information and directions so that
specific actions can be taken to protect both personnel and the instrument.
Safety Information
For your own safety, please review the following precautions:
NEVER use a power source other than that designated for the instrument.
NEVER operate the instrument, if it has not been installed or repaired properly. Repairs must be
performed only by qualified personnel authorized by VWR
NEVER use unapproved rotors and associated components. Contact the manufacturer prior to
such use to prevent possible damage to the instrument.
NEVER attempt to open the lid or move the instrument unless the rotor is completely stopped.
NEVER operate the instrument without a rotor and lid installed correctly and secured to the
motor shaft.
NEVER centrifuge flammable, toxic, radioactive, explosive, or corrosive materials.
This symbol indicates additional warnings to prevent actions that may result in equipment
damage, property damage, or personal injury.
Notes are intended to provide additional information to clarify specific instructions or
highlight information requiring special attention.
To Next Page
Loading...
