1 Introduction
13
Meritor WABCO Maintenance Manual 34 (Revised 03-16)
Figure 1.21
Figure 1.22
Heater Power Harness: Twelve-inch cable with Metri-Pack plug
provides electrical connection to air dryer heating unit. Figure 1.23.
Figure 1.23
Purge Silencer: Optional part for all Meritor WABCO air dryers. It is
used to reduce the noise level of an air dryer purge. Figure 1.24.
Figure 1.24
Pressure Protection Elements: Ports that are located directly on
the air dryer. The eight ports are directly connected to the primary,
secondary and any auxiliary air tanks. The function of the pressure
protection elements is to protect the air tanks from a loss of
pressure in the air system. These pressure protection elements are
not serviceable. Figure 1.25.
Figure 1.25
Figure 1.21
Figure 1.22
Figure 1.23
4007691a
SYSTEM SAVER
1200 PLUS
Figure 1.24
Figure 1.25
4011899a