3-60 OM 25-3503 us – Edition 4.1 * * 2503_3503b330.fm
Operation
3.38 Crane lifting the machine
Important information regarding loading
Crushing hazard due to incorrect machine loading with a
crane!
Causes serious injury or death.
• Ensure that no one is in the machine!
• All persons must stay clear of the hazard zone when raising the machine.
• See chapter “Safety, section 2.7”.
• Do not lift the machine with material in the attachment.
• Ensure that the lifting gear has the required lengths L1 and L2
• Set the slewing stabilizer blade (option 3503) straight.
Injury hazard when loading and transporting!
Can cause serious injury or death.
• See chapter “Safety, section 2.7”.
Information!
The manufacturer’s warranty shall not apply to accidents or damage caused
by loading or transporting the machine.
Information!
When loading and driving the machine on ramps, the engine can be damaged
if the oil level is too low.
• Check the oil level before loading the machine on a truck.
• The oil level must be visible at the MAX mark.
Information!
Check the fastening screws of the cabin/canopy with a torque wrench before
raising the machine – see chapter 3.41 Removing the cabin/canopy on
page 3-63.
To Next Page
Loading...
Need help?
General
