T00848GB.fm
30
MAINTENANCE
Engine oil
Check oil level:
The engine must be horizontally place when filling in oil or
checking the oil level.
Check oil level with dip stick (16).
If oil level is to low, top up with brand quality oil
Fuchs Titan Unic 10W40 MC through oil feed opening (16).
Oil change:
Drain the oil while the engine is still warm to assure rapid and
complete draining.
1. Remove the oil filler cap (16).
2. Release the waist oil drain hose (2) and collect the draining oil in
an appropriate container.
3. Attach the waist oil drain hose (2) back again.
4. Pour the recommended oil through the oil filler tube (16) and then
check the oil level.
ATTENTION! Place machine in horizontal position before
checking engine oil level.
5. Install the oil filter cap.
Take notice: Please pay attention to the corresponding environmental laws when disposing of used engine
oil. We recommend you carry the oil in a container to a central collecting point for used oils. Do
not pour used engine oil into the garbage nor into the sewer system, waste pipes or even on
the ground.
To Next Page
Loading...
Need help?
General
