Wacker Neuson BS 60-2i Repair Manual

Repair Engine and Upper Machine Components
wc_tx001546gb.fm 59
4.17 Engine Cooling Fins
Recommended Tools
Screwdriver
Compressed air
The Wacker WM 80 engine is air cooled, so dirt accumulation between
the cylinder ribs may cause the engine to overheat. Use a screwdriver
to remove any dirt that is impacted between the cylinder ribs. Clean the
entire area using compressed air.

Wacker Neuson BS 60-2i Specifications

General

Brand	Wacker Neuson
Model	BS 60-2i
Category	Power Tool
Language	English