Wacker Neuson BS 70-2 Repair Manual

Engine and Upper Machine Components Repair
36 wc_tx001546gb.fm
Continued from the previous page.
4.5.2 Install the throttle control bracket and the stop switch (f) with screws
(g).Torque the screws to 10 Nm (7 ft.lbs.).
4.5.3 Reconnect the stop switch wiring
(c) to the engine.
4.5.4 Reinstall the clamp
(d).
4.5.5 Reinstall the throttle control.
4.5.6 Reinstall the silencing cover.
Result
The replacement procedure is now complete.

Wacker Neuson BS 70-2 Specifications

General

Brand	Wacker Neuson
Model	BS 70-2
Category	Vibratory rammers & tampers
Language	English