Maintenance BS 600/BS 700
wc_tx000024gb.fm 30
6.7 Transportation
See Graphic: wc_gr000208
6.7.1 Always shut off engine and close fuel valve when transporting
machine.
6.7.2 Make sure lifting device has enough capacity to hold machine (see
identification plate on machine for weight).
6.7.3 Use central lifting point (a) when lifting machine.
Always inspect crane lifting cable for wear, damage, or abuse. Protect
cable from any sharp edges. Do not use if there are any signs of cut
wires, excessive wear, or other defects. Replace damaged cable
immediately to avoid injury or death.
6.7.4 Tie down machine on vehicle to prevent it from tipping, falling, or
rolling. Lay machine down flat and tie to vehicle at points (a) and (b).
CAUTION: Drain fuel tank as required to prevent fuel leaking from cap
(c).
WARNING
To Next Page
Loading...
Need help?
General
