Scope of delivery/Symbols
T01125en.fm 14
3. Scope of delivery/Symbols
3.1 Scope of delivery
If any of the components listed here is not included with delivery,
please contact your salesperson!
3.2 Symbols
You will find the following symbols on the machine and when reading the
operator's manual:
Read the operator's manual
and observe the warnings
and safety information
Multifunction switch
Start/Stop (I/O), choke
Use extra caution! Locked / Unlocked
1. Cut-off saw
3. Combination wrench 13/19 mm
4. Offset screwdriver
5. Screwdriver for setting the carburetor
6. Operator's manual (without illustration)
To Next Page
Loading...
