EasyManuals Logo

Wacker Neuson BTS 1030L3 User Manual

Wacker Neuson BTS 1030L3
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
T01127en.fm 57
Maintenance work
8.4 Prefilter, air cleaner cartridge and internal filter
Prefilter (dry foam) (all models except for BTS 1140L3)
Wash out the dirty prefilter (1) in warm soap water using household
dish washing detergent or filter cleaner. Do not clean the prefilter with
fuel!
Rinse away dirt under running water.
Work of filter cleaner into the prefilter foam into a good lather.
Rinse the prefilter under running water.
Dry the prefilter well.
NOTE: The prefilter must be cleaned daily; if an unusual amount of
dust is produced, several times a day. If it is not possible to clean the
prefilter on site, have a reserve prefilter ready. Renew the prefilter after
ever 25 hours of operation at the latest.
Align the prefilter with the cover holder when inserting it into the filter
cover, then press it into the filter cover (5). The prefilter must be flush
with the cover holder in all areas and pressed in tightly.
56

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson BTS 1030L3 and is the answer not in the manual?

Wacker Neuson BTS 1030L3 Specifications

General IconGeneral
BrandWacker Neuson
ModelBTS 1030L3
CategorySaw
LanguageEnglish

Related product manuals