T01127en.fm 53
Maintenance work
8. Maintenance work
NOTICE:
Only use spare parts from Wacker Neuson! Non-compliance will
exempt the manufacturer from all liability.
NOTICE:
When working on the cut-off saw, always turn off the engine, remove
the cutting blade, pull off the spark plug connector and wear protective
gloves!
NOTICE:
The cut-off saw must not be started until it has been completely as-
sembled and tested!
NOTE:
For your safety, regular checks and maintenance must be carried out
at a Wacker Neuson service station because many parts not discussed
in this operator's manual are important safety devices and, like all
parts, are also subject to wear.
NOTICE:
If the cutting blade breaks during the cutting process, before
starting the machine again it must be serviced in a Wacker
Neuson shop!
48
To Next Page
Loading...
Need help?
General
