BA D18 us* 1.1 * D18i400.fm 4-7
Putting into operation 4
Fastening the seat belt
Insert buckle latch A into seat belt buckle B until it engages.
Unfastening the seat belt
Press the red push button switch C on seat belt buckle B until the buckle
latch comes out.
➥ Seat belt D is automatically retracted.
Adjusting the mirrors (option)
Injury hazard to persons in the danger zone!
Persons in the danger zone are possibly not seen when reversing the
machine. This can cause accidents with serious injuries or death.
► Adjust the existing visual aids (for example the rearview mirrors)
correctly.
► Interrupt work immediately if persons enter the danger zone.
► Pay attention to the movements and changing positions of persons.
Accident hazard due to restricted field of vision on the job site!
Accidents resulting in serious injury or death can be caused by a restricted
field of vision.
► Do not allow anyone to stay in the danger zone.
► Use suitable visual aids if necessary (for example a camera, mirrors,
guide).
► Additional equipment must not be installed if it impairs visibility.
To Next Page
Loading...
Need help?
General
