4-8 BA D18 us* 1.1 * D18i400.fm
4 Putting into operation
Accident hazard due to incorrect adjustment of visual aids!
Incorrectly adjusted visual aids can cause serious injury or death.
► Before starting work, ensure that all visual aids are clean, functional and
adjusted in accordance with the instructions in this Operator’s Manual.
► Immediately replace damaged or broken visual aids.
► Curved mirrors enlarge, reduce or distort the field of view.
► The operator must follow the national and regional regulations.
• Use safety-oriented ladders and work platforms for adjustment work on
the machine.
• Do not use machine components as a climbing aid.
• Set the skip to travel position before adjusting the mirrors.
Adjusting the outside rearview mirrors on left and right
• Ensure sufficient visibility from the operator seat onto the job site.
• Ensure maximum visibility to the rear.
• Ensure visibility of the rear left edge of the machine in the mirror on the left.
• Ensure visibility of the rear right edge of the machine in the mirror on
the right.
Adjusting the inside mirror
• Ensure sufficient visibility from the operator seat onto the job site.
To Next Page
Loading...
Need help?
General
