Wacker Neuson E13-01

4-2 BA EZ17 en* 1.1 * ez17i400.fm
4 Putting into operation
Rear tarpaulin (option)
Installing/removing
1. Stop and park the machine. Stop the engine. See “Preparing
lubrication”.
2. Roll up the rear tarpaulin and secure it with both straps A.
3. Push the rear tarpaulin into the frame or pull it out of the rail under it.
➥ Hooks B must show inward (see figure 43).
Fig. 41
A
Fig. 42
Fig. 43 (shown inside)
B