BA E16 en* 1.0 * E16_10_700.fm 7-3
Maintenance 7
Maintenance plan
Daily maintenance (operator)
Symbol
Inspection work
(Check the following fluids and lubricants, check the oil levels after a test
run and add oil if necessary)
Page
Check the fluids and lubricants (engine oil, engine coolant, hydraulic oil)
7-34; 7-37;
7-42
Check the radiator and hydraulic oil cooler for dirt, clean them if neces-
sary
7-38
Check the fuel radiator for dirt, clean it if necessary
Lubricate the vehicle according to the lubrication schedule 7-9
Tier IV: Check the dirt indicator on the air filter
1
7-39
Check the water separator (pre-filter) and fuel filter on sight glass; drain
water if necessary
7-30
Check the track tension and retension the tracks if necessary 7-47
Check the engine air intake 7-39
Check the pin locks --
Check line fixtures --
Check the indicator lights and acoustic warning devices 4-28; 5-19
Check the swivel unit brake for correct function 5-23
Check the hydraulic couplings for dirt --
Check the threaded fittings of the protective structures (for example the
cabin) for tightness
2
--
Clean the lights/light system, signaling systems --
Safe load indicator: check the acoustic warning system 5-34
To Next Page
Loading...
