EasyManuals Logo

Wacker Neuson E16-02 User Manual

Wacker Neuson E16-02
302 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #247 background imageLoading...
Page #247 background image
BA E16 en* 1.0 * E16_10_800.fm 8-3
Malfunctions 8
Symbols are listed according to priority.
Additionally an exclamation mark can appear in the display element or the multifunctional display and a
buzzer can sound.
Contact a Wacker Neuson service center in case of malfunctions or signs
that are not listed in the following tables or that persist after maintenance
has been performed correctly.
--
Hydraulic oil temperature too high
Check the hydraulic oil level and add oil if necessary.
Hydraulic oil cooler dirty; clean hydraulic oil cooler if necessary
Note: If the malfunction is still indicated despite having cleaned hydraulic-
oil radiator and added oil, stop the engine and contact a Wacker Neuson
service center.
7-42,
7-38
7-43
Replace the hydraulic oil filter
Contact a Wacker Neuson service center.
--
--
Dirty air filter
Stop the engine immediately.
Contact a Wacker Neuson service center.
--
--
Coolant temperature
Let the engine run at high idling speed without any load.
Wait until the temperature drops and the indicator light goes out.
Stop the engine.
Check the coolant level.
--
--
Faulty telltale light
Stop the engine immediately.
Contact a Wacker Neuson service center.
Note: The indicator light illuminates when the starter is turned on and goes
out as soon as the engine runs.
--
Symbol
tier III
Symbol
tier IV
Description See
Malfunction/sign Possible cause Remedy See
Engine does not start or is not easy
to start
Empty fuel tank Refueling 7-28
Malfunctioning or empty battery
Replace the battery. Contact
a service center.
--
Malfunctioning fuse Check the fuse 9-5
Engine starts, but does not run
smoothly or faultless
Air in fuel system Let the engine run --
Water in fuel system Empty the water separator 7-30
Wrong diesel fuel
Observe the fuel, lubri-
cants, and coolants list
7-17
Engine overheats
Engine oil level too low Adding engine oil 7-35
Dirty radiator fins Cleaning the radiator 7-38
Coolant level too low Adding coolant 7-37
Malfunctioning or insufficiently
tightened V-belt
Contact a service center --
Insufficient or no engine oil pressure Engine oil level too low Adding engine oil 7-35

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson E16-02 and is the answer not in the manual?

Wacker Neuson E16-02 Specifications

General IconGeneral
BrandWacker Neuson
ModelE16-02
CategoryExcavators
LanguageEnglish

Related product manuals