Safety EH 23, 27
16
Do not direct towards people
Do not direct the machine towards people in the vicinity during operation. The
tool might be flung out and cause serious injuries.
No persons endangered
Be sure that no persons are endangered by flying or falling materials. Always
work very attentively, and anticipate potential hazards.
Switching off the machine
Switch off the machine and pull the plug out of the plug receptacle in the following
situations:
Before breaks.
If you are not using the machine.
If you are changing the tool.
If you are removing chips or splinters.
Before storing the machine, wait until it has completely stopped running.
Store the machine or put it down in such a way that it cannot tilt, fall down or slip.
Storage
Set the machine down or store it securely so that it cannot tilt, fall down or slip.
Storage location
After operation, allow the machine to cool and then store it in a sealed-off, clean
and dry location protected against frost and inaccessible to children.
3.6 Safety during the operation of hand machines
Safe working with hand machines
Secure loose workpieces with suitable methods.
While working, as a rule hold the machine on the provided handles with both
hands.
While working, hold the machine in such a way that hand injuries are avoided
when hitting hard objects.
Setting the hand machine down properly
Set the machine down carefully. Do not drop the machine to the floor or from
greater heights. Dropping the machine can cause injuries to other persons or the
machine itself can be damaged.
To Next Page
Loading...
Need help?
General
