Maintenance EH 23, 27
32
8.2 Maintenance work
Work in the workshop
Perform maintenance work in a workshop on a workbench. This has the following
benefits:
Protection of the machine of contamination on the construction site.
A level and clean work surface makes work easier.
There is a better overview over small parts and they are not lost as easily.
Visual inspection for damage
f Check all machine parts and components for damage.
Cleaning the machine
1. Remove dirt from ventilation slots.
2. Wipe the housing with a damp and clean cloth.
WARNING
Electrical voltage.
Injuries from electrocution.
f Remove the plug from the plug receptacle before all work on the machine.
WARNING
A damaged machine part or power cable can result in personal injury caused by
electric current.
f Do not operate a damaged machine.
f Have a damaged machine repaired immediately.
To Next Page
Loading...
