Wacker Neuson EHB 10 series

TD00032GB
5
TECHNICAL DATA
EHB 10/230 EHB 10/240
EHB 10/230 THW EHB 10/240 GB
EHB 10/230 DBP
EHB 10/230 SEV
EHB 10/230 BW
Item no. 0006943 ... 0007084 ...
0007082 ... 0007085 ...
0007081 ...
0007083 ...
0007087 ...
Length x width x height (without tool) mm: 545 x 105 x 245
Operating weight (mass) without tool kg: 10
Voltage V: 230 ~ 240 ~
Power input kW: 1,15 1,1
Current consumption A: 5 4,5
Frequency Hz: 50/60 50
Percussion rate electronic control min
-1
: 1300 - 2100
Drill speed electronic control min
-1
: 170 - 265
Special lubricating grase Grease Unirex N2
Shaft for drilling tools hexagonal SW 19 x 80
Shaft for breaking tools SW 19 x 82,5
Power transmission percussion system From motor via crank mechanism to air-cushioned
percussion system
Power transmission drilling drive From motor via crank mechanism to bevel
gear, safety clutch, drive shaft, tool holder
bushing
Drive motor Built-in insulatet universal motor for single
phase operation
Sound pressure level at operators station L
PA
: 96 dB(A)
The weighted effective acceleration value,
determined according to ISO 8662, Part 1
m/s
2
: is7,7