MP15 Maintenance
wpm_tx001873gb.fm 26
5.9 Transporting Machine
See Graphic: wpmgr008612
To avoid burns or fire hazards, let engine cool before transporting
machine or storing indoors.
5.9.1 Turn fuel valve to the off position and keep the engine level to prevent
fuel from spilling.
5.9.2 Tie down machine on vehicle to prevent machine from sliding or tipping
over. Tie machine to vehicle at points shown on graphic.
5.10 Storage
If plate is being stored for more than 30 days:
5.10.1 Remove loose stones and dirt from plate.
5.10.2 Clean engine cylinder cooling fins.
5.10.3 Clean or replace air filter.
5.10.4 Change exciter oil.
5.10.5 Change engine oil and follow procedures described in engine manual
for engine storage.
5.10.6 Cover plate and engine and store in a clean, dry area.
WARNING
wpmgr008612
To Next Page
Loading...
Need help?
General
