Wacker Neuson PS2 800 User Manual

PS(A)2 800 / PSW3 1500 Safety Information
wc_si000289gb.fm 11
1.5 Labels
A nameplate listing the model number, item number,
revision number, and serial number is attached to each
unit. Please record the information found on this nameplate
so it will be available should the nameplate become lost or
damaged. When ordering parts or requesting service
information, you will always be asked to specify the model
number, item number, revision number, and serial number
of the unit.
CAUTION
Do not attempt to operate this product before reading the
Operator’s Manual and understanding its contents.
Mishandling of this product may result in explosion, fire, or
electrical shock.
Do not pull on the power cord or use the power cord to lift
the pump.
Always use a dedicated ground leakage circuit breaker.
Be sure to install the ground wire securely.
Be sure to disconnect the power supply before handling or
inspecting the pump.
Never insert your hand into the pump inlet holes while the
pump is connected to the power supply.
Wacker Neuson Corporation
Menomonee Falls, WI 53051 USA
Model Item No. Rev.
Serial No.
VHz
kWkgMax. L/minMax. m
MADE IN TAIWAN
HPlbsMax. GPMMax. ft
CUS
L
I
S
T
E
D
R
Phase
C22.2 No. 108-M89
2001993
Conforms to UL Std. 778
Cert . to CAN/CSA Std.
Amp.
Man. Y/
M
THERMALLY PROTECTED
INDOORS OR OUTDOORS
CSA ENCLOSURE
3

Wacker Neuson PS2 800 Specifications

General

Brand	Wacker Neuson
Model	PS2 800
Category	Water Pump
Language	English