WACOM Cintiq Pro 32 - Configuring SLP Discovery

Conguring SLP Discovery
Enable Service Location Protocol (SLP) discovery so that SLP management entities can
dynamically discover devices without requiring prior knowledge of their network conguration.
You enable SLP discovery from the OSD and AWI Discovery pages, shown next:
Parameter
Description
Endpoint Manager
Topology
When the client has been automatically discovered by an Endpoint Manager, this section
displays information about the connection.
If the client used manual discovery, this information does not display.
•
URI Type:
Displays whether the client is connected to an internal Endpoint Manager or
an external one.
•
Endpoint Manager URI:
Displays the URI (uniform resource identier) for the Endpoint
Manager the client is currently using.
•
Certificate Fingerprint:
Displays the certicate ngerprint (digital signature) that was
used to authenticate the Endpoint Manager.
Endpoint Bootstrap
Manager URI
This eld displays when the discovery mode is set to
Manual
.
Enter the URI for the Endpoint Bootstrap Manager the client will connect to for bootstrap
information using the following format, and click
Apply
:
This URL requires a secured WebSocket (wss://) prefix.
The PCoIP Management Console’s
listening port is 5172. Entering this port number is optional. If you do not include it, port
5172 will be used by default.
wss
:
//<EBM IP address/FQDN>:[port number]
Devices must reside on the same subnet
• Teradici recommends conguring DHCP Vendor Class Options directly in the DHCP server to discover PCoIP
endpoints
• SLP discovery requires all PCoIP devices to reside on the same network subnet. For SLP discovery to work across
subnets, you must congure routers to forward multicast trac between subnets.

Conguring SLP Discovery
© 2020 Teradici 261