WACOM PTH-451 - Mac-Specific Problems

78
Contents Index
78
IndexContents
78
IndexContents
MAC-SPECIFIC PROBLEMS
At startup, a dialog box
appears telling you that either
the driver failed to load or the
tablet preferences have not
yet been created.
The tablet was not detected at startup.
If using a wireless connection
:
• Make sure the wireless connection is active. See Battery and
wireless connection status.
•From the G
O menu, select UTILITIES and launch the SYSTEM
P
ROFILER. Select USB from the HARDWARE section of the CONTENTS
list. A Wacom USB tablet model should be listed. If a tablet model
is not listed, check the wireless connection.
If connected with the provided USB cable
:
• Make sure the USB cable is securely connected to an active USB
port on your computer or USB hub. Check to be sure that a tablet
status LED is illuminated. If your tablet is plugged into a USB hub,
make sure the hub is connected and active.
•From the G
O menu, select UTILITIES and launch the SYSTEM
P
ROFILER. Select USB from the HARDWARE section of the CONTENTS
list. A Wacom USB tablet model should be listed. If a tablet model
is not listed, check the USB tablet cable connection or try plugging
the tablet into a different USB port.
If you are still having difficulties, uninstall then reinstall the tablet driver
software.
If this does not help, contact Wacom for Technical Support.
See .