To Next PageTo Next PageWhat to do if Waeco Service Equipment shows “Not enough refrigerant! Add !”?
If the display shows “Not enough refrigerant! Add !”, it means that during the process input, there is not enough refrigerant in the internal container to complete the process. To resolve this, fill the refrigerant container.
Why does my Waeco AirCon Service Center VAS 6380B display “WARNING ! Internal vessel filled.” and what should I do?
If the display shows “WARNING ! Internal vessel filled.”, it means that the internal refrigerant container is too full to hold the quantity to be extracted. You should drain the internal refrigerant container in the proper manner.
What does it mean when my Waeco AirCon Service Center VAS 6380B Service Equipment displays “WARNING ! Not enough UV. Add.”?
If the display shows “WARNING ! Not enough UV. Add.”, it means that during the filling process, there is not enough UV additive in the container to finish the process. To solve this, fill the UV additive container.
What does “Error 03” mean on Waeco AirCon Service Center VAS 6380B Service Equipment?
If the display shows “Error 03”, it means that no data is coming from the refrigerant scale. To solve this, check the scale.
What to do if Waeco Service Equipment shows “WARNING ! Not enough oil. Add.”?
If the display shows “WARNING ! Not enough oil. Add.”, it means that during the filling process, there is not enough fresh oil in the container to finish the process. To fix this, top up the fresh oil container with a suitable oil type.
What does “Error 02” mean on my Waeco AirCon Service Center VAS 6380B and how can I fix it?
If the display shows “Error 02”, it means the pressure increased again with pressure increase test and it is not possible to reduce pressure sufficiently. To resolve this, check the air conditioner and connections for leaks, constrictions and ice build-up. Also, check pressure transducer calibration.
What to do if Waeco AirCon Service Center VAS 6380B Service Equipment displays “Error 01”?
If the display shows “Error 01”, it means that it was not possible to reduce the pressure sufficiently before the pressure increase test. Check the air conditioner and connections for leaks, constrictions, and ice build-up. Also, check the pressure transducer calibration.
What does it mean when Waeco AirCon Service Center VAS 6380B displays “External tank empty or closed valve ! Check!”?
If the display shows “External tank empty or closed valve ! Check!”, it means that at the start or during the filling of the internal refrigerant container, the set refrigerant quantity cannot be attained. Check if the external refrigerant container still contains enough refrigerant or if the valves of the external refrigerant container are open.
What does “A/C System leakage. Carry on?” mean on my Waeco Service Equipment and what should I do?
If the display shows “A/C System leakage. Carry on?”, it means that at the end of the vacuum process, the air conditioning system shows a vacuum loss of more than 120 mbar during the checking time. To solve this, check the air conditioning system or the connections between it and the AirConServiceCenter for leaks.
What does it mean when my Waeco AirCon Service Center VAS 6380B displays “Not enough vacuum. carry on?” and what should I do?
If the display shows “Not enough vacuum. carry on?”, it means that during the vacuum process, the pressure in the air conditioning system after 8 minutes is still more than 50 mbar. To fix this, check the air conditioning system or the connections between it and the AirConServiceCenter for leaks.
General| Brand | Waeco |
|---|---|
| Model | AirCon Service Center VAS 6380B |
| Category | Service Equipment |
| Language | English |
Identifies the AirCon Service Center models VAS 6380B and VAS 6381B.
Outlines essential safety guidelines for operating the unit.
Details procedures for operating the device safely and avoiding hazards.
Provides crucial safety measures for working with refrigerants.
Lists specific warnings and describes the unit's safety mechanisms.
Lists components included in the product package for both models.
Details optional accessories available for purchase.
Defines the correct usage and commercial application of the service center.
Identifies components and controls on the front panel of the unit.
Identifies components and connections on the rear panel of the unit.
Guides users through the initial setup and powering on procedures.
Explains the standby menu and initial configuration steps like language selection.
Details how to enter company data, date, and time for service logs.
Describes how to adjust preset values for common service tasks.
Instructions for inserting oil and UV additive containers into the unit.
Steps to specify the size of oil and UV additive containers for the unit.
Guides on the initial filling process of the unit's internal refrigerant tank.
Procedures for safely shutting down the unit in emergencies or during malfunctions.
Describes the automated service process for quick operation.
Explains how to set up and manage user access codes for the device.
Details how to create a database of vehicles and their refrigerant filling quantities.
Instructions for exporting service data and reports to a USB drive.
How to view and print refrigerant filled and extracted data.
Procedures for testing the vehicle's air conditioning system using the unit.
Allows step-by-step execution of individual service processes.
Guides on flushing the vehicle's AC system with refrigerant.
Instructions for performing annual leak tests on the unit.
Steps to calibrate the scales for accurate oil and UV additive measurement.
Procedure for replacing the unit's dryer filter.
Explains filter maintenance and resetting service messages.
Details the process for calibrating the pressure transducer for accurate readings.
Instructions for replacing the oil in the unit's vacuum pump.
How to access and interpret various counter readings saved by the device.
Correcting filling quantities based on service hose length.
Instructions for replacing the printer paper roll.
Steps to update the unit's software and vehicle database via USB.
Procedure for manually venting non-condensing gases from the tank.
Guidelines for cleaning the unit's exterior and checking hoses.
Procedures for properly disposing of used fluids and packaging materials.
Instructions for disposing of the old service unit in accordance with regulations.
Lists common display messages, their causes, and remedies.
Lists detailed technical specifications for the VAS 6380B model.
Lists detailed technical specifications for the VAS 6381B model.
A diagram illustrating the refrigerant flow and system components.
Identifies and describes the components shown in the system flow chart.
Provides the electrical schematic for the unit's circuitry.
