To Next PageTo Next PageWhat does “Error 04” mean on my Waeco AirConServiceCenter ASC 2500 G LE?
If the Waeco Air Conditioner displays “Error 04”, it indicates that it is not possible to lower the pressure when flushing takes place. Check the air conditioner and connections for leaks, constrictions, and ice build-up. Also, check the pressure transducer calibration.
What does “Warning! Internal vessel overpressure!” mean on my Waeco AirConServiceCenter ASC 2500 G LE?
If the Waeco Air Conditioner display shows “Warning! Internal vessel overpressure!”, it is a normal message that appears during the recycling process. To continue, press ENTER for three seconds. If the message appears repeatedly, notify customer services.
What does “Change the vacuum pump oil! Carry on?” mean on my Waeco Air Conditioner?
When the Waeco AirCon Service Center displays “Change the vacuum pump oil! Carry on?”, this message appears when you switch on the unit. Change the vacuum pump oil as soon as possible. To skip this, press ENTER.
What does “Change the equipment drier filter! Carry on?” mean on my Waeco AirConServiceCenter ASC 2500 G LE?
When the Waeco AirCon Service Center displays “Change the equipment drier filter! Carry on?”, it means that the internal filter needs to be changed. Change the internal filter as soon as possible. To skip this message, press ENTER.
Why does my Waeco AirConServiceCenter ASC 2500 G LE display “Warning! Not enough vacuum for injection!”?
If the Waeco Air Conditioner displays “Warning! Not enough vacuum for injection!”, it means that during the filling phase, the vacuum in the air conditioning system is insufficient to end the process. To solve this, check the air conditioning system and the connections between it and the AirCon Service Center for leaks.
What does “Error 02” mean on my Waeco Air Conditioner?
If the Waeco Air Conditioner displays “Error 02”, it means the pressure increased again during the pressure increase test, and it's not possible to reduce the pressure sufficiently. Check the air conditioner and connections for leaks, constrictions, and ice build-up. Also, verify the pressure transducer calibration.
What does “Error 01” mean on my Waeco Air Conditioner?
If the Waeco Air Conditioner displays “Error 01”, it indicates that the pressure could not be sufficiently reduced before the pressure increase test. To fix this, check the air conditioner and its connections for leaks, constrictions, and ice build-up. Also, check the pressure transducer calibration.
What to do if my Waeco Air Conditioner displays “A/C system leakage! Carry on?”?
If your Waeco Air Conditioner displays “A/C system leakage! Carry on?”, this indicates a vacuum loss of more than 120 mbar during the checking time at the end of the vacuum process. You should check the air conditioning system and its connections to the AirCon Service Center for leaks.
General| Model | ASC 2500 G LE |
|---|---|
| Refrigerant Type | R134a |
| Oil Drainage | Automatic |
| Integrated Vehicle Database | Yes |
| Refrigerant | R134a |
| Power Supply | 230 V, 50 Hz |
| Vacuum Pump Capacity | 100 l/min |
Contact information for additional support.
Explains warning, caution, notice, and note symbols used in the manual.
Outlines essential safety regulations and personnel requirements.
Provides critical safety measures for using the AirCon Service Center.
Details precautions for safe handling of refrigerants to prevent injury and environmental harm.
Lists important warnings related to voltage, rain, and protective gear.
Describes the function of pressure monitor and pressure relief valves.
Identifies and describes components on the front of the unit.
Illustrates and labels components on the rear and side of the unit.
Guides the user through initial physical setup and device power-on.
Explains the information displayed in the standby mode.
Details the procedure for selecting the operating language.
Describes how to input company information for service logs.
Explains how to set the device's date and time.
Covers adjusting preset operational parameters for specific tasks.
Instructions for physically placing the fluid containers into the unit.
Guides on specifying the volume of oil and UV additive containers.
Step-by-step process for initially filling the unit's refrigerant reservoir.
Covers safe shutdown and emergency stop measures for the unit.
Explains the automated service process for common tasks.
Details setting up and using user codes for access control.
Instructions for saving vehicle-specific data for service logs.
Guides on exporting service reports and data to a USB drive.
How to view and print refrigerant usage data.
Procedure for testing the vehicle AC system without refrigerant recovery.
Allows step-by-step execution and customization of service processes.
Detailed steps for flushing the vehicle's AC system with refrigerant.
Describes how to perform leak detection on the AirCon Service Center.
Steps to ensure accurate measurement of oil and UV additive quantities.
Instructions for replacing the unit's internal dryer filter.
Covers resetting counters after filter replacement and leak testing.
Procedure for ensuring accurate pressure readings.
Step-by-step guide for replacing the oil in the vacuum pump.
How to view various operational counters and readings.
Adjusting refrigerant quantities based on service hose length.
Instructions for changing the paper roll in the unit's printer.
Process for updating the device's firmware and vehicle database via USB.
Procedure for replacing the receptacle for used oil.
Guidelines for safely disposing of hazardous used fluids.
Instructions for recycling packaging waste.
Procedures for environmentally sound disposal of the entire unit.
Lists key performance and physical characteristics of the ASC 2500 G LE model.
Lists key performance and physical characteristics of the ASC 3500 G LE model.
Visual representation of the refrigerant and fluid flow within the ASC 2500 G LE.
Visual representation of the refrigerant and fluid flow within the ASC 3500 G LE.
Schematic detailing the electrical components and connections for the ASC 2500 G LE.
Schematic detailing the electrical components and connections for the ASC 3500 G LE.
