To Next PageTo Next PageWhy does my Waeco ASC2300G Air Conditioner display “Max. filling time exceeded! Carry on?”?
This message appears during the filling process if the set amount of refrigerant cannot be filled. Check that AirConServiceCenter connections are not blocked.
How to fix Waeco Air Conditioner when display shows “Printer not in line! Carry on?”?
The message indicates that the printer has a fault. Check if there is paper in the printer, ensure the printer is switched on (the yellow LED must be constantly lit), and verify that the cover is properly closed.
Why does my Waeco ASC2300G Air Conditioner display “Warning! Pressure inside the A/C system. Recovery start!”?
This message appears at the start of the vacuum process because there is still pressure present in the air conditioning system. No action is required as the process will continue automatically.
What does it mean when my Waeco ASC2300G Air Conditioner displays “Warning! Pressure inside the A/C system!”?
This message appears during the vacuum process, indicating pressure in the air conditioning system. No action is needed; the process continues automatically.
What to do if Waeco ASC2300G displays “Not enough oil. Add!”?
This message appears during the filling process if there is not enough fresh oil in the container to finish the process. Top up the fresh oil container with a suitable oil type.
What to do if Waeco ASC2300G Air Conditioner displays “Error 04”?
This message indicates that it is not possible to lower the pressure when flushing takes place. Check the air conditioner and connections for leaks, constrictions, and ice build-up. Check the pressure transducer calibration.
What does it mean if my Waeco Air Conditioner displays “Error 02”?
This message means the pressure increased again with the pressure increase test, and it is not possible to reduce pressure sufficiently. Check the air conditioner and connections for leaks, constrictions, and ice build-up. Check the pressure transducer calibration.
What to do if Waeco Air Conditioner displays “Error 03”?
This message indicates that no data is coming from the refrigerant scale. Check the scale.
What does it mean when my Waeco ASC2300G Air Conditioner displays “A/C system leakage! Carry on?”?
This message appears at the end of the vacuum process. The air conditioning system shows a vacuum loss of more than 120 mbar during the checking time. Check the air conditioning system or the connections between it and the AirConServiceCenter for leaks.
Why does my Waeco ASC2300G display “Warning! Not enough vacuum for injection!”?
This message appears during the filling phase if the vacuum in the air conditioning system is insufficient to end the process. Check the air conditioning system or the connections between it and the AirConServiceCenter for leaks.
General| Brand | Waeco |
|---|---|
| Model | ASC2300G |
| Category | Air Conditioner |
| Language | English |
Details essential safety precautions for operating the unit safely.
Lists visual warnings and symbols found directly on the AirCon Service Center unit.
Describes built-in safety mechanisms like pressure monitors and relief valves.
Unit designed for vehicle air conditioning maintenance and commercial use.
Operation restricted to expert personnel using R-134a refrigerant systems only.
Guides through physical setup and initial device power-on procedures.
Instructions for correctly placing oil and UV additive containers into the unit.
Specifies how to input the volume of oil and UV additive containers used.
Procedure for charging the unit's internal refrigerant supply from an external source.
Describes the fully automatic service process with minimal user interaction required.
Information on securing the station with personal user codes for access control.
Step-by-step instructions for setting up user accounts and their unique access codes.
How to log in and enable the station using a previously created user code.
Performing an air conditioning system test without refrigerant extraction.
Step-by-step servicing with options to customize or skip individual procedures.
Detailed steps for refrigerant recovery and pressure increase testing.
Instructions for system evacuation, leak testing, and vacuum checks.
Procedure for flushing the vehicle's air conditioning system with fresh refrigerant.
