Cleaning and caring for the inverter PerfectPower
38
9.1 Using the inverter without remote control
➤ Set the main switch (fig. 2 1, page 3) to
– “ON” to switch the inverter on
– “OFF” to switch the inverter off
✓ LED “POWER” lights up when the inverter is switched on.
9.2 Using the inverter with a remote control
I
Note
Refer to the operating instructions of the remote control which are
also included in the scope of delivery.
➤ Set the main switch (fig. 2 1, page 3) to “Remote”.
➤ Switch the inverter on or off using
– the buttons on the remote control or
– the external switch
✓ LED “POWER” lights up when the inverter is switched on.
10 Cleaning and caring for the inverter
a
Caution
Do not use sharp or hard objects or cleaning agents for cleaning as
these may damage the device.
➤ Occasionally clean the device with a damp cloth.
_PP1000_PP2000.book Seite 38 Dienstag, 6. April 2010 4:31 16
To Next Page
Loading...
