Need help?Do you have a question about the WAGNER 700 and is the answer not in the manual?
General guidance on handling the machine after unpacking, checking completeness, and using original parts.
Highlights safety aspects with a warning mark, operator training, and general safety precautions.
Guidelines for checking and connecting the machine's power supply line safely.
Instructions for setting up and adjusting the machine, emphasizing safety during these operations.
Defines the proper use of the firewood circular saw, emphasizing wood processing and safety regulations.
Details potential risks such as injury from the saw blade, health hazards from dust/noise, and electrical dangers.
Lists the items included with the rocker circular saw upon purchase.
Provides detailed specifications, measurements, power unit details, and noise values for the machines.
Instructions for assembling the machine, noting it is delivered mostly assembled.
Guidance on properly setting up the machine on a stable, leveled floor.
Instructions on how to safely move the machine using the transport handle.
Describes how to lock the rocker in place for transport.
Details on connecting the machine to the power supply, including plug type and switch operation.
Explanation of the motor brake function, its stopping time, and troubleshooting for defects.
Information on common causes of power cord damage and safety precautions for their use.
Specifications for power supply, extension cables, and polarity for rotary current motors.
Specifications for supply voltage, extension cables, and power supply for AC motors.
Electrical schematic for Wagner 700/700s models, showing components and connections.
Guidance on fitting all safety features and holding the wood correctly during operation.
Advice on performing maintenance, adjustments, and cleaning only when the motor is switched off.
Step-by-step instructions for safely replacing the saw blade using provided tools.
Identifies a common issue (saw not slowing down) and its remedy (renew brake board).
Manufacturer's declaration that the machine complies with relevant EG-regulations.
Details the warranty terms, including reporting apparent faults and replacement of defective parts.
Exploded view illustration of the Wagner 700 model with part numbers for identification.
Detailed illustration of Wagner 700 components with specific part numbers.
Exploded view illustration of the Wagner 700s model with part numbers for identification.
Detailed illustration of Wagner 700s components with specific part numbers.
Exploded view illustration of the Wagner z700s model with part numbers for identification.
To Next Page
General