How to fix iced up air motor in WAGNER Leopard 35-70 Water Pump?
If your WAGNER Water Pump's air motor is icing up, it's likely due to excessive condensation water in the air supply. To fix this, install a water separator.
How to fix WAGNER Leopard 35-70 Water Pump if the air motor does not work?
If the air motor of your WAGNER Water Pump does not work or stops, try opening and closing the ball valve on the pressure regulator unit or briefly disconnecting the compressed air supply.
General| Voltage | 230 V |
|---|---|
| Frequency | 50 Hz |
| Maximum flow rate | 7000 l/h |
| Maximum head | 7 m |
| Max Flow Rate | 7000 l/h |
To Next Page
