89
PXM
OPERATING AND ASSEMBLY MANUAL
VERSION 08/2015 ORDER NUMBER DOC2350372
9.2 TYPES OF FAULT MESSAGES
Warnings:
Warning messages are displayed in yellow in the visualization but do not cause the system
to be stopped. The warning is reset automatically (without acknowledgement) when the
warning state has been resolved.
Faults:
Error messages are displayed in red in the visualization.
Faults cause the system to be stopped.
System stop in the case of faults:
Reaction to a fault in the system:
Faulty devices are switched o and the "Powder center OK" outlet is set to "LOW".
9.3 CURRENT
1. Press the "Alarm" button in the right-hand
menu bar to activate the function.
2. The "Current alarms" page is displayed.
3. To reset the error, press the "Con rm"
button.
Home page
Cleaning
Settings
Alarm
Worker
Current History
Con rm
Time No. Description
Wagner bigbag: malfunction
Warning linear motion unit not referenced ==> Move to the top manually
To Next Page
Loading...
Need help?
General
