94
PXM
P_02586
P_02587
P_02588
OPERATING AND ASSEMBLY MANUAL
VERSION 08/2015 ORDER NUMBER DOC2350372
The following repairs can be carried out as needed:
Replacing the O-ring on the blowout station for the injectors in case of leaks
Replace scraper rings on the guide bushings of the intake tubes
Replace uid tubes
Replace the solenoid valves on the pressure tank of the blowout device
Replace the solenoid valves of the lter suction
Replace transvector to the guide tubes of the injector holding plate (mounted on the
roof)
Check the wearing parts on the injectors and replace if necessary in accordance with
the Injectors operating manual
Check the wearing parts of the IP 5000 and replace if necessary in accordance with the
IP 5000 operating manual
To Next Page
Loading...
Need help?
General
