WAGNER Power Painter - Cleanup; You will need:; Cleaning Procedure

English
10 
Cleanup
You will need:
  
  
  
Make sure you clean the sprayer in a well-
ventilated area whenever cleaning with
flammable solvents.
The sprayer contains electrical parts.
DO NOT submerge the sprayer into any
liquids.
To Clean:
  


  
  


  

  
  



7. IMPORTANT: Make sure to completely remove
all material from the inside of the piston
chamber by scrubbing with the brush. Even a
small amount of material can dry like glue and
keep the piston from moving, causing damage
to the sprayer.
8. IMPORTANT: Make sure to keep the vent hole
(a) on the pump housing clean and unblocked
or a vacuum can build up in the container and
cause damage to the sprayer. A toothpick or
straightened paper clip can be used to clean it.
(a)
1 2
3
4
5
876