WAGNER Power Painter - Troubleshooting; Excessive Fogging; Runs and Sags in Paint; Material Drips

English
 13
Troubleshooting
PROBLEM CAUSE SOLUTION
Problem E: Excessive
fogging
 
 

 


 

Problem F: Runs and sags
in paint
 



 

Problem G: Material drips
from spray tip or guard
 


 


Problem H: Material
leaking from between
spray tip and locking nut.
 
 

 
 
 
 


 
 
Problem I: Motor
overheats
 
 
 
 
 
 

This unit has no servicable electrical
parts. Do not attempt to service this
unit yourself.
Questions?
Call Wagner Technical Service at:
1-800-328-8251
Register your product online at:
www.wagnerspraytech.com