WAGNER Super Finish 7000 - Table of Contents

34
Super Finish 7000
GB
contents
Contents
1 SAFETY REGULATIONS FOR AIRLESS SPRAYING 35
1.1 Flash point _________________________________ 35
1.2 Explosion protection _________________________ 35
1.3 Danger of explosion and re from sources of
ignition during spraying work _________________ 35
1.4 Danger of injury from the spray jet _____________ 35
1.5 Secure spray gun against unintended operation __ 35
1.6 Recoil of spray gun __________________________ 35
1.7 Breathing equipment as protection against
solvent vapors ______________________________ 35
1.8 Noise protection ____________________________ 35
1.9 Prevention of occupational illnesses ____________ 36
1.10 Max. operating pressure ______________________ 36
1.11 High-pressure hose (safety instructions) _________ 36
1.12 Electrostatic charging
(formation of sparks or ames) ________________ 36
1.13 Use of units on building sites and workshops _____ 36
1.14 Ventilation when spraying in rooms ____________ 36
1.15 Suction installations _________________________ 36
1.16 Earthing of the object ________________________ 36
1.17 Cleaning the unit with solvents ________________ 36
1.18 Cleaning the unit ___________________________ 36
1.19 Work or repairs at the electrical equipment ______ 36
1.20 Work at electrical components _________________ 36
1.21 Working with a number of guns ________________ 36
1.22 Transport using a crane ______________________ 36
1.23 Setup on an uneven surface ___________________ 37
2 GENERAL VIEW OF APPLICATION ____________ 37
2.1 Application ________________________________ 37
2.2 Coating material ____________________________ 37
2.2.1 Coating materials with sharp-edged additional
materials __________________________________ 37
2.2.2 Filtering ___________________________________ 37
3. DESCRIPTION OF UNIT _____________________ 38
3.1 Airless process ______________________________ 38
3.2 Functioning of the unit _______________________ 38
3.3 Explanatory diagram _________________________ 39
3.4 Transportation ______________________________ 39
3.5 Transport using a crane ______________________ 40
3.6 Technical data Super Finish 7000 _______________ 40
4 STARTUP _________________________________ 41
4.1 Unit with suction system _____________________ 41
4.2 High pressure hose and spray gun ______________ 41
4.3 Connection to the mains network ______________ 42
4.4 Cleaning preserving agent when starting-up of
operation initially ___________________________ 42
4.5 Ventilate unit (hydraulic system) if the sound of
inlet valve is not audible ______________________ 42
4.6 Taking the unit into operation with
coating material ____________________________ 43
5 SPRAYING TECHNOLOGY ___________________ 43
5.1 TempSpray (accessory) _______________________ 43
6 HANDLING THE HIGHPRESSURE HOSE _______ 43
6.1 High-pressure hose __________________________ 43
7 INTERRUPTION OF WORK ___________________ 43
8 CLEANING THE UNIT _______________________ 44
8.1 Cleaning the unit from the outside _____________ 45
8.2 Suction lter _______________________________ 45
8.3 High-pressure lter __________________________ 45
8.4 Cleaning the Airless spray gun _________________ 46
9 SERVICING ________________________________ 46
9.1 General servicing ___________________________ 46
9.2 High-pressure hose __________________________ 46
10 REPAIRS AT THE UNIT ______________________ 46
10.1 Inlet valve Pusher ___________________________ 46
10.2 Inlet valve _________________________________ 47
10.3 Outlet valve ________________________________ 47
10.4 Pressure control valve ________________________ 48
10.5 Relief valve ________________________________ 48
10.6 Replacing the diaphragm _____________________ 48
10.7 Replacing the power cable ___________________ 49
10.8 Typical wear parts ___________________________ 49
10.9 Connection diagram _________________________ 50
10.10 Remedy in case of faults ______________________ 52
11 SPARE PARTS AND ACCESSORIES ____________ 53
11.1 Super Finish 7000 accessories _________________ 53
11.2 Spare parts list Pump head ___________________ 56
11.3 Spare parts list Pump-Aggregate ______________ 57
11.4 Spare parts list high-pressure lter _____________ 59
11.5 Spare parts List Trolley _______________________ 59
11.6 Spare parts list suction system (rigid) ___________ 60
11.7 Spare parts list hopper _______________________ 60
Testing of the unit ________________________________ 61
Important information on product liability_____________ 61
Note on disposal __________________________________ 61
Guarantee declaration _____________________________ 61
CE - declaration__________________________________ 127
European service network _________________________ 128