WAGNER Super Finish 7000 - Transport Using a Crane; Technical Data Super Finish 7000

40
Super Finish 7000
Do not suspend the device using the exten-
dable shaft.
GB
3.5 TRANSPORT USING A CRANE
For attaching points for the straps or rope (not wire cable) see
gure.
descrIptIon of unIt
3.6 TECHNICAL DATA SUPER FINISH 7000
Article no. basic unit 2305973 2306248
Voltage : 230 Volt ~,
50 Hz
400 Volt ~,
50 Hz
Fuses : 16 A time-lag 16 A
Unit connecting line : 6 m long,
3x1.5 mm²
6 m long,
5x1.5 mm²
Max. current consumption
hose heating : 13.5 A 5.8 A
Degree of protection : IP 44 IP 44
Acceptance capacity : 2.8 kW 3.1 kW
Max. operating pressure : 25 MPa
(250 bar)
25 MPa
(250 bar)
Max. volume ow : 7.2 l/min 7.2 l/min
Volume ow at 12 MPa
(120 bar) with water :
5.8 l/min 5.8 l/min
Max. temperature of the
coating material : 43 °C 43 °C
Max. viscosity : 15 000 mPas 15 000 mPas
Empty weight pump : 60 kg 60 kg
Hydraulic oil lling quantity: 1.5 litre 1.5 litre
Max. vibration at the spray
gun :
lower than
2.5 m/s²
lower than
2.5 m/s²
Max. sound pressure level:
82 dB (A)* 82 dB (A)*
*Place of measurement: 1 m distance from unit and 1.60 m
above oor, 12 Mpa (120 bar) operating pressure, reverberant
oor