TITANUS
TOP·SENS
®
/Rev.a
Technical Description
06/13
23
Technical Description
System Description
The air sampling smoke detection system TITANUS
®
consists of the basic
device and the pipe system.
The most important components of the basic device include the sensitive de-
tector modules for the detection of smoke aerosols and the aspiration unit to
carry air samples to the detector module with integrated air flow sensor in
order to monitor the pipe system for any fractures and blockages.
On the whole, the pipes and fittings are made of PVC or ABS plastic.
Figure 4: Overview air sampling smoke detection system TITANUS TOP·SENS
®
To ensure safe operation even under the most difficult circumstances (e.g.
recycling areas) a wide variety of accessories are available, e.g. different
kinds of air filters or relay indicators. During installation in areas difficult to
oversee, the relay indicator serves as status indicator for the basic device.
During project planning, each air sampling point in the pipe system of TITA-
NUS
®
represents a spot-type detector.
3
3.1
To Next Page
Loading...
