Need help?Do you have a question about the WAGNER TITANUS PRO-SENS 2SL and is the answer not in the manual?
General| Brand | WAGNER |
|---|---|
| Model | TITANUS PRO-SENS 2SL |
| Category | Smoke Alarm |
| Language | English |
Information on safety symbols and warnings used in the manual.
Details on system features like sensitivity, LOGIC·SENS, and airflow monitoring.
Describes suitable applications for early smoke detection in various environments.
Details the components and design of the air sampling pipe system.
Technical specifications for the main device, including voltage, current, dimensions, and housing.
Guidelines for designing the pipe system, including symmetry and aperture rules.
Details on adjusting air flow sensitivity and monitoring parameters.
Specifies limits for pipe length and aspiration apertures per project type.
Configuration of detector module settings, including sensitivity and delay periods.
Positioning sampling points in forced air flow systems for effective detection.
Installation of detonation prevention devices in explosive areas.
Procedures for adjusting the air flow sensor for accurate readings, considering air pressure.
Activating the detector module and checking alarm signal transmission to the CFDU.
Verifying the detection of pipe fractures and blockages via air flow monitoring.
Performing functional checks on the system using test equipment and procedures.
Step-by-step guide for replacing a detector module.
Verifying the air flow sensor adjustment and its dependency on air pressure.
To Next Page
