GB
21
W 450
4. Description/ Scope of delivery
Description/ Scope of delivery (Fig. 1)
1 Air cap (to set the working direction) 2 Nozzle
3 Union nut 4 Spray jet width adjustment
5 Wall Extra I-Spray spray attachment 6 Trigger
7 Material volume regulation 8 Handle
9 Air hose 10 ON/OFF switch
11 Carrying belt 12 Air lter
13 Spray gun holder 14 Mains lead
15 Container 16 Valve
17 Ventilating hose 18 Feed hopper
19 Stirring rod 20 Practice poster
Lubricating grease*
* This is inside the container: remove it before starting operations!
5. Field of application
W 450 has been specially developed for the application of interior wall paints.
Special spray attachments are required to process low-viscosity materials such as
paints, glazes etc.. These can be found under "Accessories".
6. Coating Materials Suitable for Use
Interior wall paint (dispersions and latex paint)
7. Coating Materials Not Suitable for Use
Materials that contain highly abrasive components, facade paint, caustic solutions and
acidic coating substances. Flammable materials.
8. The following materials can only be processed with
optional accessories:
Water- and solvent-based paints, nishes, primers, 2-component paints, clear nishes,
automotive nishes, staining sealers and wood sealer-preservatives.
To Next Page
Loading...
