WAGNER W 590 User Manual

34
W 590 Flexio
EN
Spare Parts List Standard spray attachment (Fig. 24)
9 Container with cover 800 ml 0413 909
*
Before placing the order, please check the bottom of the inside
of your spray attachment to see if there is a marking there. Do
this by unscrewing the container and removing the container
seal.
B253AR
Spare Parts List W 590 (Fig. 25)
Pos. Designation Order No.
1 Air lter cover 2397 458
2 Air lter set 2397 460
3 Stirring rod 2304 419
Lubricating grease (no g.) 2315 539
23. Accessories
The CLICK&PAINT SYSTEM with additional spray attachments and accessories oers
the right tool for each work.
Further information about the WAGNER range of products for renovating is available
under www.wagner-group.com
24. Correction of Malfunctions
ProblemProblem CauseCause RemedyRemedy
No coating material
emerges from the
nozzle
•
Device not switched on
•
Nozzle clogged
•
Feed tube clogged
•
Material quantity too small
•
Feed tube loose
•
No pressure build-up in container
•
Ventilating bore (Fig. 14,1)
clogged
•
Press the ON/OFF switch
on the side of the device
•
Clean
•
Clean
•
Increase the quantity of
material
•
Insert
•
Tighten container
•
Clean

WAGNER W 590 Specifications

General

Power	630 W
Max. Viscosity	80 DIN
Power Consumption	630 W
Max. Power Consumption	630 W
Voltage	230 V
Frequency	50 Hz
Container Capacity	1300 ml
Container Volume	1.3 L